Wavetronix SMARTSENSOR 105 Guía de instalación descargar pdf (Pagina 27)

SmartSensor 105 User Guide – Wavetronix LLC 9/20/07 - -

Appendix C – RS-232 Communication

Communication between the SmartSensor and PC can be established using the RS-232

DTE specifications, along with the use of a Null Modem cable and the standard 9-pin

“D” male connector. Please use the following guidelines for connecting the SmartSensor

cable to the serial connection on a PC or modem when not using a Click! 200.

NOTE: The RS-232 pin outs remain the same on the SmartSensor cable regardless of

connecting to a PC or a modem. If connecting to a PC, a null modem cable is required

(see Figure 17). If connecting to a modem or other DCE device then a straight through

serial cable is used (see Figure 18).

Figure 17 – Connecting a PC to the SmartSensor

Table 4 – RS-232 Connections

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Sin comentarios

Wavetronix SMARTSENSOR 105 Guía de instalación Pagina 27