Wavetronix SMARTSENSOR 105 Guía de instalación descargar pdf (Pagina 33)

SmartSensor 105 User Guide – Wavetronix LLC 9/20/07 - -

Communication between the SmartSensor and PC can be established using the RS-232

DTE specifications, along with the use of a Null Modem cable and the standard 9-pin

“D” male connector. Please use the following guidelines for connecting the SmartSensor

cable to the serial connection on a PC or modem when not using a Click! 200.

NOTE: The RS-232 pin outs remain the same on the SmartSensor cable regardless of

connecting to a PC or a modem. If connecting to a PC, a null modem cable is required

(see Figure 22). If connecting to a modem or other DCE device then a straight through

serial cable is used (see Figure 23).

Figure 22 – Connecting a PC to the SmartSensor (OLD)

Table 6 – RS-232 Connections (Old Cable)

Figure 23 - Connecting a Modem to the SmartSensor

The table below shows the individual wiring of both the new and old SmartSensor cables

and how they correspond.

1 2 ... 28 29 30 31 32 33 34 35 36

Sin comentarios

Wavetronix SMARTSENSOR 105 Guía de instalación Pagina 33