Wavetronix SmartSensor HD (101-0415) - User Guide Manual de usuario Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 89
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
CHAPTER 1 INSTALLING THE SMARTSENSOR HD 15
Note
Do not over-tighten the fasteners.
Figure 1.3 – Attaching the Sensor to the Mount Bracket
Aligning the Sensor to the Roadway
Use the following steps to correctly mount and align the SmartSensor HD:
1 Tilt the sensor down so that the front is aimed at the center of the detection area (see
Figure 1.4).
Figure 1.4 – Up-and-down Positioning
2 Adjust the side-to-side angle so that it is as close to perpendicular to the ow of trac
as possible (see Figure 1.5).
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 88 89

Comentarios a estos manuales

Sin comentarios