Wavetronix SmartSensor HD (101-0415) - User Guide Manual de usuario descargar pdf (Pagina 27)

26 CHAPTER 2  CONNECTING POWER AND SURGE

Earth

Ground

Black (Line)

Green (Ground)

White (Neutral)

Red (+24VDC)

Black (Ground)

Figure 2.5 – AC Surge Protection

To add a Click 210 circuit breaker and switch (see the le side of Figure 2.5):

1 Mount the Click 210 onto the DIN rail.

2 Connect the line conductor (usually black) from the AC terminal block or cord in to

either side of the module.

3 Wire out of the other side.

Note

For ease in troubleshooting, it is recommended that you follow the wire color scheme

outlined in this chapter.

Wiring the Click 230

e next device in the power plant is the Click 230, which is the AC surge protector (see

Figure 2.5). To install:

1 Mount the Click 230 onto the DIN rail next to the Click 210.

2 Connect the line conductor (black) from the Click 210 to terminal 5 on the IN side of

the Click 230.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 88 89

Sin comentarios

Wavetronix SmartSensor HD (101-0415) - User Guide Manual de usuario Pagina 27